Train Station Turnstile Intelligent Automatic Flap Barrier Gate
With Smart Card Door
Our turnstiles can be used bi-directionally on one side thanks to
the electromechanical mechanism. The choice of direction can be
easily controlled by the end users. Remote access can be granted or
removed independently from the person making the change. All
mechanical parts and electromechanical control systems are
manufactured in our Turboo facilities. All Tansa Tripod Tournaments
have TSEK, ISO and CE certificates.
- the system automatically canceled this access permissions , reset
time value can be set up on line
- A direction indicator, showed that pedestrian access to the current
status of, and guide pedestrian's
- correct, fast trip
- Auto show has been in use for statistics and numbers
- with voice and strobe light alerts
- System with power, standby power started to open the channel gate
in state- a transparent channel
- A combination of infrared sensors and police anti-illegal entry
into pedestrian access ,
- the protection of pedestrians smooth and the prevention of the
channel following function
- With other models of channel gate in the same system in use
|Max power consumption||35w|
|Working temperature||-25~70 °C|
|Input||12v dry contact|
Features and Benefits
1. It has a clear and definite indicating function for the
passenger, and it is displayed directly and visually on LED with
passing or barring indication for passenger.
2. The entire system runs smoothly, with a low noise and free of
3. Control of the turnstile is achieved usually by an
electro-mechanism mounted within the top section of the flap
barrier and accessible by open the top cover. Only mechanical
control is also available.
4. It has failure self-detect and alarm indication function,
facilitating maintenance and application for the users.
5. A positive action lock/anti-tailgating function which prevents
two passages at one time.
6. The flap barrier is provided with a standard electric interface
and is easily integrated into a system with write/read facilities
such as magnetic card, bar code card, ID card, IC card or biometric
7. Two or one direction can be controlled by switch-button and
8. It is provided with multiple operation modes for selection. It
can either read card in double way for flow limit, or reading card
in a way while barring in the other, or read card in a way while
free passage in the other. Moreover, the operation mode of flap
barrier may be set up with the software.
9. The mechanism is locked until a valid open signal is received.
10. The wing of the flap barrier can drop down automatically when
the power is off. When the power is on again, the arms can also
close automatically. Fail-safe or fail-lock functions: The
mechanism will lock/unlock the flap barrier flap in one or both
directions in case of power failure.
1. Single passage in the set direction
2. Bi-directional single passage
3. Free passage in the set direction
4. Always free or locked
1.. Housing and arm: Made in stainless steel AISI 304 o AISI316.
2. PC flap and moulding machine core